Backing Pad for DA Sanders

<< back to products

Backing pad (moulded) for grinding flat and curved surfaces (for velours backed paper)

Back plate made of fiberglass, medium-hard, height 12 mm
ø
in mm		 Specification  Thread  Item No.
110 0 5/16” UNF 25982-2C
123 0 5/16” UNF 24982-2C
123 0 5/16” UNF and M8 24983-2C
123 8 5/16” UNF 25002-2C
123 8 5/16” UNF and M8 25003-2C
123 5 5/16” UNF 25012-2C
123 5 5/16” UNF and M8 25013-2C
148 0 5/16” UNF 24962-2C
148 0 5/16” UNF and M8 24963-2C
148 6 5/16” UNF 24972-2C
148 6 5/16” UNF and M8 24973-2C
148 8 5/16” UNF 25062-2C
148 8 5/16” UNF and M8 25063-2C
148 8+1(Festo) 5/16” UNF and M8 25433-2C
schlyupmpolier6
RPM table
ø
in mm		 Max. permitted speed  [RPM]
123 mm 12000
148 mm 10000
Back plate made of fiberglass, hard, height 8 mm
ø
in mm		 Specification Thread  Item No.
123 0 5/16” UNF 25282-2H
123 0 5/16” UNF and M8 25283-2H
123 5 5/16” UNF 25302-2H
123 5 5/16” UNF and M8 25303-2H
148 0 5/16” UNF 25312-2H
148 0 5/16” UNF and M8 25313-2H
148 6 5/16” UNF 25322-2H
148 6 5/16” UNF and M8 25323-2H
148 8 5/16” UNF 25332-2H
148 8 5/16” UNF and M8 25333-2H
148 8+1(Festo) 5/16” UNF and M8 25483-2H
schlyupmpolier7
Cyclone effect for optimum dust extraction.
The design optimises the suction of every
hole by offering direct access to the chamber
from which the dust is extracted.

Medium-hard, height 14 mm
ø
in mm		 Specification Thread  Item No.
123 0 5/16” UNF 27602-2G
123 0 5/16” UNF and M8 27603-2G
123 8+1 5/16” UNF 27612-2G
123 8+1 5/16” UNF and M8 27613-2G
123 8+1 5/16” UNF and M8 27633-2G
123 17 5/16” UNF and M8 27653-2G
148 0 5/16” UNF 27192-2G
148 0 5/16” UNF and M8 27193-2G
148 6+1 5/16” UNF 27142-2G
148 6+1 5/16” UNF and M8 27143-2G
148 8+1 5/16” UNF and M8 27153-2G
148 15 5/16” UNF and M8 27203-2G
148 17 5/16” UNF and M8 27163-2G
148 21 5/16” UNF and M8 27173-2G
148 55 5/16” UNF and M8 27183-2G
new stempel
schlyupmpolier8
RPM table
ø
in mm		 Max. permitted speed  [RPM]
123 mm 14000
148 mm 12000
schlyupmpolier10
schlyupmpolier9

Backing pad (moulded+laminated) for grinding flat and curved surfaces (for velours backed paper)

Thread 5/16″ UNF and M8, height 14-16 mm
ø
in mm		 Specification Hardness layer 1 Hardness layer 2  Item No. Material Code
148 8+6+8+1 hart medium 35483-2D 31
148 8+6+8+1 hart very soft 35483-2D 40
148 8+6+8+1 hart soft 35483-2D 42
schlyupmpolier11
RPM table
ø
in mm		 Max. permitted speed  [RPM]
123 mm 12000
148 mm 10000